You demand the best, so does Rotor Ron! I take this Monster Max and add aluminum screws to allow for less rotor resistance which results in more RPM.
Professionally built and tuned to Rotor Ron’s strict standards, which includes the rotor properly shimmed, complete evaluation of stator, rotor strength & asymmetry and sensor board deviation.
Includes Rotor Ron Dyno Service and instructions that will get you up to speed, fast! ( A $29.99 Value! No need to ever touch the timing again!) Motor specs and dyno sheet included along with stickers for your vehicle.
The Reedy S-Plus Competition Spec Brushless Motor was developed over several months of behind-the-scenes track testing. The heart of the S-Plus is a thin leg stator that allows shorter wire lengths, resulting in a massive reduction in resistance. This reduction in resistance, hovering just above the minimum allowed by R.O.A.R., means that the S-Plus is Reedy’s most powerful spec motor ever!
The thin-leg stator offers another benefit — weight reduction. By reducing the motor’s weight, handling and chassis turning flexibility improves. Machined parts such as the can, timing cap, back plate, and sensor assembly have been placed on a diet. An entire section of the front plate has been removed to reduce weight with an added benefit of allowing the user to re-position it to lower CG depending on which type of car it is being installed in. A savings of nearly 30g has been achieved! Additionally, the motor’s length has been reduced by more than 2mm, which aids left/right balance and moves mass towards the center of the chassis.
A redesigned high-strength, balanced rotor is more powerful that its predecessor. Because the rotor is interchangeable with those in 540-M3 spec motors, a wide range of tuning options are already available. Precision stainless steel ball bearings have been fitted to accommodate high RPM loads with exceptional efficiency and reliability.
- CNC-machined lightweight can
- Low-resistance stator
- High-strength, balanced rotor
- Silver-plated solder tabs
- Precision ball bearings
- Optimized air cooling
- Adjustable Timing
- Competition proven
- R.O.A.R. approved
Cells: 1-2S LiPo
Shaft Diameter: 3.15mm
Perfect for all 2wd buggy & touring cars – all oval cars – all 1/12 on-road, all carpet oval.
This brand new 1/10 Scale motor that is tuned by Rotor Ron will put YOU on the Podium!
If you are unsure this is right for you, please reach out to me first before purchasing.
ROAR Approved, just keep in mind these stators are on the edge of the new ROAR rules.