Description
Keep your bearings rolling smooth with this bearing blaster from RPM.
Blast away debris from your bearings with the RPM Bearing Blaster! This is a simple two-piece design to simplify difficult bearing cleaning tasks. The RPM Bearing Blaster has an open, flow through design that eliminates back-pressure, which also permits more efficient elimination of dirt and grit from the bearings being cleaned. This tool uses hand pressure to hold the bearing in place during cleaning which means easier access to the bearings being cleaned and makes cleaning bearings much quicker. By using hand pressure, you will know for sure the cleaning agent is passing through the bearings and not bypassing them. The Bearing Blaster works with all bearings with a minimum I.D. of 1/8" (3mm.) and a maximum O.D. of 3/4" (19mm.).
Simply hold the tool together with one hand and blast it with motor spray from the other hand.
This is a must have in any racers tool box! Works great with my TA Emerald Motor Spray (sold separately)
After you clean them, always oil those bearings with SHAG Oil (also sold separately).
*Colors may vary
Rotor Ron approved and recommended!
#RotorRon
