Hobbywing XD10 Pro Drift ESC Red 30112615

Features:

    - Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step: 0.1V) for usage with servos & other devices require different voltages.
    - A separate PRG/FAN port is able to power an external fan to maximize cooling performance or connect an LCD program box or WiFi module to the ESC.
    - Variable frequency regulation of PWM & brake frequencies allows users to precisely regulate the driving & braking forces (of the motors).
    - Multiple protections: low-voltage cutoff protection, ESC and motor thermal protection, and fail-safe (throttle signal loss protection), reverse polarity protection (the external standard cap pack will still be damaged if battery reversal occurs).
    - Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real-time.
    - Firmware upgrade via Hobbywing multifunction LCD program box or OTA Programmer (item sold separately)

Specifications
ID     Xerun XD10 PRO ESC - Drift
Application     1/10th drift car
Cont./Peak Current     100A/800A
Input Voltage     2S LiPo/4-6S NiMH
BEC Output     5-7.4V Adjustable, Continuous Current of 5A (Switch-mode)
Wires & Connectors     Standard: 13AWG 200mm
Programming device     LCD program box
OTA programmer (available through Firmware update)
Firmware     LCD Program box via USB software (PC only)
OTA  (iOS / Android)
Size & Weight     40.7x35.0x32.0mm (w/Fan)
Weight     95g (w/ wires)
Motor Limit*     Brushless Motor Limit with 2S LiPo/6S NiMH: 8.5T

What comes in the box?

    XD10 PRO ESC w/ a cooling fan
    (2) Input wires & (3) Output wires -PRE-SOLDERED-
    (2) x cooling fan (comes with one backup fan)
    Decals
    Bonus parts: heat tubes, double tape, nylon cable zap traps