Team Associated SR10M Dirt Oval Street Stock 1/10 Scale Team Kit 70032 ASC70032

Street Stock Dirt Oval Racing
All the dirt, clay and pavement-racing excitement in a 1:10 scale RC car! Often overlooked in the mainstream, dirt track racing is one of the most exciting forms of tire-scorching car racing action. Competitions are held on oval tracks with a surface of dirt or clay. With locations available throughout the United States, it's easy to see why everyone enjoys gathering to these year-round weekly experiences.

The SR10M Dirt Oval Race Car features 24 precision ball bearings, fully adjustable suspension, vertical ball ends for roll center adjustments, 2.6:1 ratio gearbox with heavy-duty sealed gear differential, and externally adjustable V2 slipper clutch. The new Octalock spur gear and 11mm Octalock pads are used for maximum consistency and higher torque capacity. Look for a dirt track racing event near you. All are welcome to race, run for fun, or just enjoy the action. The time for tearing up the oval track is now!

Required to Complete:

    1:10 scale electric motor
    Electronic speed control
    Pinion gear
    7.4V-7.6V 2S LiPo with "shorty" battery dimensions (standard or low-profile height)
    Battery charger (for the batteries mentioned above)
    2-channel surface transmitter
    2-channel receiver
    steering servo
    Lexan body
    Lexan specific spray paint for body
    1:10 scale wheels and tires
    4X AA batteries
    Other helpful items: Silicone Shock Fluid, Silicone Diff Fluid, Body Scissors (#1737), Reamer (#1499) / Hole Punch, FT Wrench Set (#1519), Hobby Knife, Needle Nose Pliers, Wire Cutters, Soldering Iron, Calipers or a Precision Ruler

Specifications:

    Scale - 1:10
    Power - Electric
    Length - 536.4mm (21.1")
    Width - 250mm (9.8")
    Weight - 1424g (3.14lbs)
    Wheelbase - 277.8mm (10.9")
    Transmission Ratio - 2.6:1

Features:

    Updated mid-motor rear carbon fiber shock tower for oval
    New carbon fiber chassis side braces
    Updated rear toe block for dirt oval racing
    Rear CVA drive shafts for more reliability
    Durable and lightweight aluminum top shaft
    Rugged steel turnbuckles for adjustable camber and front toe-in
    New mid-motor low center-of-gravity G10 fiberglass chassis with updated O-Ring battery straps that accommodate 2S LiPo "shorty" battery packs
    2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch
    Adjustable suspension geometry
    Vertical ball ends for roll center adjustments, front and rear
    Metric hardware throughout
    24 precision rubber-sealed ball bearings
    Impact-absorbing front and rear bumpers
    Fully adjustable front and rear body mounts
    Many Factory Team options already available!